Skip to main content
1,270 ZIP codes in 11 states (888) 555-0123
Deck Building Services

1 covered ZIP code · King County

Deck builders in Pacific, WA

Yes — we build, replace and repair decks in 1 covered ZIP code in Pacific, WA, in King County: 98047. This page uses U.S. Census housing data and NOAA climate normals for this ZIP code to explain what matters for a deck in Pacific specifically — how old the homes are, what the weather does to wood and footings, and which materials hold up best.

Pacific deck facts at a glance

Covered ZIP codes
98047
County
King County
Median year homes built
1987
Homes in covered ZIPs
2,376
Freezing days per year
27
Annual snowfall
5.6 in
Days with rain or snow
96
Suggested decking
composite or well-maintained wood

Sources: Census ACS 2020–2024 (housing), NOAA 1991–2020 normals (Tacoma #1 station). Last reviewed .

How old are homes in Pacific, and what does that mean for a deck?

27% of homes in Pacific's covered ZIP code were built in 2000 or later and 15% before 1960; the largest group dates to the 2000s.

Homes in Pacific have a median construction year of 1987, so a deck original to a typical house would now be about 39 years old — beyond the point where wood framing, fasteners and flashing can be assumed sound.

Many decks from the 1970s and 1980s were built before today's detailed deck provisions appeared in model codes. Common issues on decks of this age include corroded hangers, posts set directly in soil and ledger boards fastened with nails. Replacement is often the better value than repeated repairs.

That makes Pacific's housing 4 years newer than King County as a whole, where the median home was built in 1983. Statewide, the median Washington home was built in 1985. Among the 34 covered Washington communities with Census data, Pacific ranks #15 for oldest housing. In this ZIP code, 15% of homes were built before 1960, 24% between 1960 and 1979, 35% between 1980 and 1999, and 27% since 2000 — the single largest group dates to the 2000s.

Homes in Pacific, WA by decade built
Decade builtHomesShare
2010s823%
2000s54923%
1990s45019%
1980s37616%
1970s36515%
1960s1978%
1950s1727%
1940s1135%
before 1940723%

What does Pacific's climate mean for deck construction?

Pacific averages about 27 days a year at or below freezing, 5.6 inches of snow and 40.8 inches of precipitation, based on NOAA 1991–2020 normals.

The nearest NOAA climate station with 1991–2020 normals is Tacoma #1, about 8 miles away. It records an average of 27 days a year with a low at or below 32°F — relatively few freezing nights. On roughly 27 of those days the temperature climbs back above freezing, so water in wood, soil and gaps between boards repeatedly freezes and thaws.

Frost is less severe in Pacific than in northern states, but footings still have to meet the local frost-depth requirement, and freeze-thaw cycles are enough to work loose nails and open checks in unsealed wood.

Snowfall is light — about 5.6 inches in an average year at Mcmillin Rsvr — so occasional ice is a bigger concern than snow load. Textured boards and good drainage on stairs help on icy mornings.

Pacific sees about 40.8 inches of precipitation a year, with measurable rain or snow (0.1 inch or more) on about 96 days. Good drainage between boards, clean gaps and a ledger that is properly flashed keep that water from rotting the frame.

Summer heat is mild by comparison — average summer highs near 75°F and only about 1 days a year at 90°F or above — so board color can be chosen mostly on looks.

Which decking material makes the most sense in Pacific?

For most Pacific homes, composite or well-maintained wood is the strongest starting point.

Budget, upkeep tolerance and sun exposure on your particular lot still decide the final choice between these options.

Decking options for Pacific, WA conditions
MaterialHow it handles Pacific's conditions
Pressure-treated pineEconomical; needs regular cleaning and sealing
CedarAttractive and stable; refinish to keep its color
Capped compositeLow maintenance; handles moisture and freeze-thaw well
PVCLightest and most moisture-proof; premium price

What kinds of homes are in Pacific, and how does that shape deck design?

Pacific has about 2,376 housing units across its covered ZIP code. 62% are single-family detached homes, 5% are attached homes such as townhouses and rowhouses, and about 34% are in buildings with two or more units. Roughly 57% of occupied homes are owner-occupied.

The mix of detached homes and attached or multi-unit housing in Pacific means deck projects range from large backyard decks to compact rear decks on narrow lots. Lot size, neighbors' sightlines and any association rules shape the right design.

What deck projects are most common in Pacific?

Based on the age of Pacific's housing, the largest group of projects is likely to be replacing or rebuilding aging decks.

  • Replacement and major repair: about 1,191 homes (50%) were built between 1970 and 1999, the age group whose original or early add-on decks are most likely to have worn-out framing, connectors and boards.
  • Retrofit decks on older homes: about 554 homes (23%) predate 1970. Here the priority is confirming that add-on decks are properly attached — or rebuilding them freestanding — before any cosmetic work.
  • Upgrades and expansions: about 82 homes (3%) were built since 2010. Their decks are usually sound but small or builder-grade, so enlarging the deck, adding stairs and switching to composite or upgraded railings are common.

When is the best time to plan a deck project in Pacific?

Pacific's milder winters — about 27 freezing nights a year — allow construction through most of the year. Spring and fall are still the busiest seasons, so booking early helps.

Do you need a permit to build a deck in Pacific?

Often, yes — especially for attached or elevated decks — but the rules are set locally. Check with the building department that serves your address: the municipality, or King County for unincorporated areas.

For Pacific, WA, ask the permit office whether your deck needs a permit based on its size, height and attachment to the house, which drawings and inspections are required. Statewide code background for Washington is on our state page; local rules change, so the building department remains the authority.

How does Pacific compare with nearby covered areas?

The closest covered area is Milton, about 3.3 miles from the center of Pacific's covered ZIPs. Its median home was built in 1988, 1 years later than in Pacific. Pacific has 13 percentage points more detached single-family homes (62% vs. 49%), which changes how many projects are backyard decks versus compact townhouse decks. Owner-occupancy is 57% in Pacific compared with 56% in Milton. Pacific's covered ZIP code span about 2.1 square miles of land with roughly 2,376 homes — about 1,131 per square mile, a typical suburban density where most homes have usable backyards.

Covered areas near Pacific, WA
AreaDistanceMedian year builtCovered ZIPs
Milton3.3 mi19881
Sumner3.4 mi19901
Auburn3.8 mi19893
Fife5.3 mi20001
Federal Way5.4 mi19842
Bonney Lake6.9 mi19991

Deck planning checklist for Pacific homeowners

  • Confirm your ZIP code is 98047, the covered Pacific ZIP.
  • Find out when your current deck was built and whether it uses pre-2004 treated lumber.
  • Probe the ledger, post bases and joist tops for soft wood before planning a resurface.
  • Call 811 before any digging so utility lines are marked.

FAQs

Pacific deck questions

Who can I call for deck building or deck repair in Pacific?

Call (888) 555-0123. We build, replace and repair decks in ZIP 98047 in King County, and the call is the fastest way to confirm your address and talk through the project.

How old is the typical home in Pacific?

The median home in Pacific's covered ZIP code was built around 1987, according to the Census Bureau's 2020–2024 American Community Survey. About 15% of homes predate 1960 and 27% were built in 2000 or later.

How many freezing days does Pacific get each year?

About 27 days a year have a low at or below 32°F at the Tacoma #1 station (NOAA 1991–2020 normals), and about 27 of them warm back above freezing during the day.

Is composite or wood better for a deck in Pacific?

Composite or well-maintained wood is usually the better long-term fit. Wood remains a good lower-cost choice if you are prepared to clean and seal it regularly.

Which county is Pacific in?

ZIP 98047 is in King County, based on the Census Bureau's ZIP-to-county relationship data.

How much does it cost to build or replace a deck in Pacific?

Every deck is priced on its own size, height, materials, railings and stairs, so we don't quote a single number online. In Pacific, the local factors that most often move the price are footing depth set by local frost rules and removal of older decks and ledger or wall repairs on homes built around 1987. Call (888) 555-0123 to talk through your project.

Do you repair or replace old decks in Pacific?

Yes. With 58% of Pacific's homes built between 1960 and 1999 and 15% before 1960, many decks here are old enough to need structural repairs or replacement. We inspect the ledger, framing, footings and railings first, then recommend repair or replacement.

Can you build a composite deck in Pacific?

Yes. Composite or well-maintained wood is usually our first suggestion for Pacific. We also build with pressure-treated wood, cedar and PVC.

Call now: (888) 555-0123