How old are homes in Bellevue, and what does that mean for a deck?
27% of homes in Bellevue's covered ZIP codes were built in 2000 or later and 13% before 1960; the largest group dates to the 1960s.
Homes in Bellevue have a median construction year of 1982, so a deck original to a typical house would now be about 44 years old — beyond the point where wood framing, fasteners and flashing can be assumed sound.
Many decks from the 1970s and 1980s were built before today's detailed deck provisions appeared in model codes. Common issues on decks of this age include corroded hangers, posts set directly in soil and ledger boards fastened with nails. Replacement is often the better value than repeated repairs.
That is about the same as King County overall (median 1983). Statewide, the median Washington home was built in 1985. Among the 34 covered Washington communities with Census data, Bellevue ranks #8 for oldest housing. In these ZIP codes, 13% of homes were built before 1960, 35% between 1960 and 1979, 26% between 1980 and 1999, and 27% since 2000 — the single largest group dates to the 1960s.
| Decade built | Homes | Share |
|---|---|---|
| 2020 or later | 879 | 1% |
| 2010s | 8,993 | 13% |
| 2000s | 8,723 | 13% |
| 1990s | 7,058 | 10% |
| 1980s | 10,329 | 15% |
| 1970s | 11,693 | 17% |
| 1960s | 11,810 | 17% |
| 1950s | 7,212 | 11% |
| 1940s | 723 | 1% |
| before 1940 | 602 | 1% |
What does Bellevue's climate mean for deck construction?
Bellevue averages about 25 days a year at or below freezing, 3.8 inches of snow and 37.8 inches of precipitation, based on NOAA 1991–2020 normals.
The nearest NOAA climate station with 1991–2020 normals is Seattle Sand Pt Wsfo, about 5 miles away. It records an average of 25 days a year with a low at or below 32°F — relatively few freezing nights. On roughly 24 of those days the temperature climbs back above freezing, so water in wood, soil and gaps between boards repeatedly freezes and thaws.
Frost is less severe in Bellevue than in northern states, but footings still have to meet the local frost-depth requirement, and freeze-thaw cycles are enough to work loose nails and open checks in unsealed wood.
Snowfall is light — about 3.8 inches in an average year at Seattle Sand Pt Wsfo — so occasional ice is a bigger concern than snow load. Textured boards and good drainage on stairs help on icy mornings.
Bellevue sees about 37.8 inches of precipitation a year, with measurable rain or snow (0.1 inch or more) on about 95 days. Good drainage between boards, clean gaps and a ledger that is properly flashed keep that water from rotting the frame.
Summer heat is mild by comparison — average summer highs near 75°F and only about 2 days a year at 90°F or above — so board color can be chosen mostly on looks.
Which decking material makes the most sense in Bellevue?
For most Bellevue homes, composite or well-maintained wood is the strongest starting point.
Budget, upkeep tolerance and sun exposure on your particular lot still decide the final choice between these options.
| Material | How it handles Bellevue's conditions |
|---|---|
| Pressure-treated pine | Economical; needs regular cleaning and sealing |
| Cedar | Attractive and stable; refinish to keep its color |
| Capped composite | Low maintenance; handles moisture and freeze-thaw well |
| PVC | Lightest and most moisture-proof; premium price |
What kinds of homes are in Bellevue, and how does that shape deck design?
Bellevue has about 68,022 housing units across its covered ZIP codes. 48% are single-family detached homes, 6% are attached homes such as townhouses and rowhouses, and about 47% are in buildings with two or more units. Roughly 53% of occupied homes are owner-occupied.
Because so much of the housing in Bellevue is multi-unit, a meaningful number of decks and balconies are governed by condominium or building associations. For single-family homes and townhouses here, check whether any association rules apply before you design.
What deck projects are most common in Bellevue?
Based on the age of Bellevue's housing, the largest group of projects is likely to be replacing or rebuilding aging decks.
- Replacement and major repair: about 29,080 homes (43%) were built between 1970 and 1999, the age group whose original or early add-on decks are most likely to have worn-out framing, connectors and boards.
- Retrofit decks on older homes: about 20,347 homes (30%) predate 1970. Here the priority is confirming that add-on decks are properly attached — or rebuilding them freestanding — before any cosmetic work.
- Upgrades and expansions: about 9,872 homes (15%) were built since 2010. Their decks are usually sound but small or builder-grade, so enlarging the deck, adding stairs and switching to composite or upgraded railings are common.
When is the best time to plan a deck project in Bellevue?
Bellevue's milder winters — about 25 freezing nights a year — allow construction through most of the year. Spring and fall are still the busiest seasons, so booking early helps.
Do you need a permit to build a deck in Bellevue?
Often, yes — especially for attached or elevated decks — but the rules are set locally. Check with the building department that serves your address: the municipality, or King County for unincorporated areas.
For Bellevue, WA, ask the permit office whether your deck needs a permit based on its size, height and attachment to the house, which drawings and inspections are required. Statewide code background for Washington is on our state page; local rules change, so the building department remains the authority.
How does Bellevue compare with nearby covered areas?
The closest covered area is Mercer Island, about 4.1 miles from the center of Bellevue's covered ZIPs. Its median home was built in 1973, 9 years earlier than in Bellevue. Bellevue has 19 percentage points fewer detached single-family homes (48% vs. 67%), which changes how many projects are backyard decks versus compact townhouse decks. Owner-occupancy is 53% in Bellevue compared with 67% in Mercer Island. Bellevue's covered ZIP codes span about 35.7 square miles of land with roughly 68,022 homes — about 1,905 per square mile, a typical suburban density where most homes have usable backyards.
| Area | Distance | Median year built | Covered ZIPs |
|---|---|---|---|
| Mercer Island | 4.1 mi | 1973 | 1 |
| Medina | 4.3 mi | 1973 | 1 |
| Sammamish | 5.7 mi | 1995 | 2 |
| Redmond | 6.2 mi | 1994 | 2 |
| Kirkland | 7 mi | 1983 | 2 |
| Seattle | 7.7 mi | 1974 | 35 |
How do Bellevue's covered ZIP codes differ?
| ZIP | Homes | Median year built | Owner-occupied | County |
|---|---|---|---|---|
| 98004 | 21,221 | 2001 | 36% | King County |
| 98005 | 9,506 | 1980 | 51% | King County |
| 98006 | 14,623 | 1980 | 80% | King County |
| 98007 | 12,555 | 1979 | 36% | King County |
| 98008 | 10,117 | 1968 | 72% | King County |
Deck planning checklist for Bellevue homeowners
- Confirm your ZIP code is one of the 5 covered Bellevue ZIPs.
- Find out when your current deck was built and whether it uses pre-2004 treated lumber.
- Probe the ledger, post bases and joist tops for soft wood before planning a resurface.
- Call 811 before any digging so utility lines are marked.

