How old are homes in Riverside, and what does that mean for a deck?
2% of homes in Riverside's covered ZIP code were built in 2000 or later and 80% before 1960; the largest group dates to the before 1940.
The median home in Riverside dates to about 1948, roughly 78 years ago. Most homes from that era were built without a deck; the decks you see now were usually added in later decades, sometimes by previous owners with little documentation.
That history matters: retrofit decks are where missing ledger flashing, undersized footings and nailed-rather-than-bolted connections are most common. Before resurfacing or extending an add-on deck, it is worth confirming how it was framed and attached.
That makes Riverside's housing 13 years older than Cook County as a whole, where the median home was built in 1961. Statewide, the median Illinois home was built in 1971. Among the 102 covered Illinois communities with Census data, Riverside ranks #6 for oldest housing. In this ZIP code, 80% of homes were built before 1960, 14% between 1960 and 1979, 5% between 1980 and 1999, and 2% since 2000 — the single largest group dates to the before 1940.
| Decade built | Homes | Share |
|---|---|---|
| 2020 or later | 28 | 0% |
| 2010s | 45 | 1% |
| 2000s | 47 | 1% |
| 1990s | 76 | 1% |
| 1980s | 246 | 4% |
| 1970s | 317 | 5% |
| 1960s | 670 | 10% |
| 1950s | 1,857 | 26% |
| 1940s | 935 | 13% |
| before 1940 | 2,807 | 40% |
What does Riverside's climate mean for deck construction?
Riverside averages about 106 days a year at or below freezing, 38.8 inches of snow and 34.4 inches of precipitation, based on NOAA 1991–2020 normals.
The nearest NOAA climate station with 1991–2020 normals is Chicago Midway AP, about 5 miles away. It records an average of 106 days a year with a low at or below 32°F — a substantial freezing season. On roughly 67 of those days the temperature climbs back above freezing, so water in wood, soil and gaps between boards repeatedly freezes and thaws.
For Riverside, that means footings must bear below the locally required frost depth to avoid heaving, and wood surfaces should be kept sealed so absorbed water doesn't split boards over winter. Synthetic decking tolerates freeze-thaw well but still needs the manufacturer's expansion gaps.
Average snowfall near Riverside is about 38.8 inches a year (Chicago Midway AP 3sw). That's enough that shoveling and ice-melt choices affect deck surfaces, and stair treads benefit from good texture and drainage.
Precipitation averages about 34.4 inches a year, falling on about 68 days with 0.1 inch or more — wet enough that drainage and flashing still matter, but dry spells also let wood surfaces dry out and check in the sun.
Average summer highs reach about 83°F, and around 20 days a year top 90°F. On a deck with full afternoon sun, dark composite can get uncomfortable on those days, so test samples in the sun before choosing a color.
Which decking material makes the most sense in Riverside?
For most Riverside homes, capped composite is the strongest starting point because roughly 38.8 inches of snow a year means regular shoveling and older homes often suit traditional wood or a wood-look composite.
On Riverside's many older homes, a wood-look capped composite or a stained cedar deck usually suits the architecture better than high-gloss boards.
| Material | How it handles Riverside's conditions |
|---|---|
| Pressure-treated pine | Economical; needs regular cleaning and sealing |
| Cedar | Attractive and stable; refinish to keep its color |
| Capped composite | Low maintenance; handles moisture and freeze-thaw well |
| PVC | Lightest and most moisture-proof; premium price |
What kinds of homes are in Riverside, and how does that shape deck design?
Riverside has about 7,028 housing units across its covered ZIP code. 74% are single-family detached homes, 3% are attached homes such as townhouses and rowhouses, and about 24% are in buildings with two or more units. Roughly 77% of occupied homes are owner-occupied.
The mix of detached homes and attached or multi-unit housing in Riverside means deck projects range from large backyard decks to compact rear decks on narrow lots. Lot size, neighbors' sightlines and any association rules shape the right design.
What deck projects are most common in Riverside?
Based on the age of Riverside's housing, the largest group of projects is likely to be retrofitting or rebuilding decks added to older homes.
- Retrofit decks on older homes: about 6,269 homes (89%) predate 1970. Here the priority is confirming that add-on decks are properly attached — or rebuilding them freestanding — before any cosmetic work.
- Replacement and major repair: about 639 homes (9%) were built between 1970 and 1999, the age group whose original or early add-on decks are most likely to have worn-out framing, connectors and boards.
- Upgrades and expansions: about 73 homes (1%) were built since 2010. Their decks are usually sound but small or builder-grade, so enlarging the deck, adding stairs and switching to composite or upgraded railings are common.
When is the best time to plan a deck project in Riverside?
Riverside has a defined building season. Spring and early fall offer the most comfortable working weather; winter is a good time to settle the design and apply for permits. Stains and sealers generally need dry weather and moderate temperatures, so plan wood finishing for late spring or early fall.
Do you need a permit to build a deck in Riverside?
Often, yes — especially for attached or elevated decks — but the rules are set locally. Check with the building department that serves your address: the municipality, or Cook County for unincorporated areas.
For Riverside, IL, ask the permit office whether your deck needs a permit based on its size, height and attachment to the house, which drawings and inspections are required. Statewide code background for Illinois is on our state page; local rules change, so the building department remains the authority.
How does Riverside compare with nearby covered areas?
The closest covered area is Brookfield, about 1.6 miles from the center of Riverside's covered ZIPs. Its median home was built in 1953, 5 years later than in Riverside. The two have a similar share of detached single-family homes (74% vs. 76%). Owner-occupancy is 77% in Riverside compared with 82% in Brookfield. Riverside's covered ZIP code span about 4 square miles of land with roughly 7,028 homes — about 1,757 per square mile, a typical suburban density where most homes have usable backyards.
| Area | Distance | Median year built | Covered ZIPs |
|---|---|---|---|
| Brookfield | 1.6 mi | 1953 | 1 |
| Hines | 1.6 mi | 1964 | 1 |
| Berwyn | 1.7 mi | 1938 | 1 |
| Lyons | 1.8 mi | 1959 | 1 |
| Forest Park | 2 mi | 1949 | 1 |
| Broadview | 2.2 mi | 1954 | 1 |
Deck planning checklist for Riverside homeowners
- Confirm your ZIP code is 60546, the covered Riverside ZIP.
- Find out when your current deck was built and whether it uses pre-2004 treated lumber.
- Ask whether a freestanding design avoids attaching to older house framing.
- Ask what footing depth your building department requires for frost.
- Plan stair location and snow storage so winter shoveling doesn't damage boards or railings.
- Probe the ledger, post bases and joist tops for soft wood before planning a resurface.
- Call 811 before any digging so utility lines are marked.

